This ready to use silicone mould is great for creating spherical parts, beads and embedding objects inside a sphere. These moulds are great for Epoxy and UV resin casting. Place a silicone mat underneath, as epoxy resin may leak through the gap due to the long curing time. No release agent is required. Keep away from abrasive materials to avoid scratching the silicone. Mould may be washed with warm, soapy water.
Measurement: approx. 6cm / 2.36″ (Diameter)
Previous product
Back to products
Silicone Mould Sphere 50mm
$17.25 (inc. gst)
Next product
Silicone Mould Square Platter 180mm
$36.80 (inc. gst)
Silicone Mould Sphere 60mm
$25.30 (inc. gst)
Available at:
Auckland
Description
Related products
Accucast Alginate LS680
Accucast Alginate LS680 is ideal for medium-sized projects, especially faces and heads. It is Green in colour and offers approximately
Plastic Putty Knife 3 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Liquid Latex
Liquid Latex is still one of the most widely used materials for flexible mould making. This natural latex material has
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Tongue Depressors
Wooden tongue depressors allow for mixing of resins, silicones and blending pigments.
Long Plastic Stirrer
Long plastic stirrers are designed for paint mixing but work well with resins and other materials.
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
