Our Signet Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Gloss
Resin required to fill: Approx. 10ml
Ring size: O-P
Previous product
Back to products
Tom Thumb Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Next product
Dome Ring Variation No.4 Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Signet Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
MLD-R7
Available at:
Auckland
Description
Related products
Tongue Depressors Box 100/Box
Wooden tongue depressors allow for mixing of resins, silicones and blending pigments.
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Plastic Drop Sheet
A Biodegradeable plastic drop sheet to help protect your work space. This sheet has dimensions of 2.6m x 3.6m
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Plastic Putty Knife 3 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Icypole Sticks
Icy pole sticks for mixing resins, not recommended for silicone or viscous materials. Great for adding and blending liquid and
