BJB’s SC-24 is a general purpose accelerator which can be used to reduce demold times of a variety of BJB polyurethane products. Note that this will also shorten the working-time of the polyurethane system after SC-24 is added. SC-24 should be added to the B side prior to mixing with A side in the amount of 1% to 2% of the total weight of the A/B system. A
small scale test should be performed to evaluate the reaction time with the particular product being used. SC-24 will have a varying degree of effectiveness with different material system. We do not recommend using this product with BJB water clear series.
Previous product
Back to products
PTFLEX 50
From $460.00
Next product
TC892 Slow Set Rigid Polyurethane
From $218.50
SC-24 Polyurethane Accelerant
$40.25 (inc. gst)
Description
Related products
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
AF-7 Anti-Foaming Agent
AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
