S-FOAM50 is a two component soft flexible foam specifically developed for low density mouldings. S-FOAM50 is ideal for puppets, soft parts, backing up latex and PU elastomer and most SFX applications. Higher densities can be achieved in a closed or restricted mould.
Previous product
Back to products
S-FOAM 128 Flex Polyurethane Foam
From $161.00
Next product
S-FOAM 65 Flex Polyurethane Foam
From $161.00
S-FOAM 50 Flex Polyurethane Foam
$69.00 (inc. gst)
Related products
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
JA7 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Aluminium Powder
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
