S-FOAM 128 Flex Polyurethane Foam is a variable ratio, self-skinning, 128kg density flexible foam. Skin thickness is controlled by material and mould temperature, and the loading of the mouLd. BJB Pigments may be added to the “B” side for developing a wide range of colours. S-FOAM 128 Flex Polyurethane Foam can be mixed by hand with a spatula, high shear mixer or machine dispensed. The 50/100 ratio yields the standard firm density of 128kg/m³, while mixing at 30/100 ratio will result in a softer feel but the density will increase 208kg/m³. This system is perfect for bumpers and crash pads, arms rests and seat cushions, movie props and special effects devices.
S-FOAM 128 Flex Polyurethane Foam
SKU: U-SFOAM128-S
$161.00 (inc. gst)
SKU: U-SFOAM128-S
Categories: Casting, Foam, Polyurethane Resin
Related products
Surface Tissue
$7.48 (inc. gst)
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Iron Powder
From $40.25
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
JA7 Alloy Stick
$48.30 (inc. gst)
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
Sold out

Close
AF-7 Anti-Foaming Agent
$69.00 (inc. gst)
AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its
Epoxycast Clear Casting Resin
From $48.30
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Isopropyl Alcohol
From $19.55
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Hanson Mixer
From $57.50
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
Bronze Powder
From $69.00
Bronze powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal