R-FOAM 200 is a polyurethane foam system designed to allow the manufacture of self skinned or structural components. This system has a cream time of 65 seconds making it ideal for hand processing. By using high speed mixing and weighing accurately, it is possible to produce effective mouldings without the use of foam dispensing machinery. R-FOAM 200 has excellent flow properties and in some cases can be demoulded in as little as 10-15 minutes without warping. This system will perform best with both components adjusted to 25ºC and moulds at 25-40ºC.
Previous product
Back to products
R-FOAM 100 Rigid Polyurethane Foam
From $86.25
Next product
R-FOAM 33 Rigid Polyurethane Foam
From $92.00
R-FOAM 200 Rigid Polyurethane Foam
$97.75 (inc. gst)
Related products
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Langridge Dry Artist Pigment
Langridge Dry Artist Pigments offer gorgeous metallics, intense opaques and vibrant fluoros, that can be used to pigment our resin
Copper Powder
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
Eye Dropper
Eyedroppers are ideal for adding liquid pigments to resins, or for creating effects in resin art using Isoproyl Alcohol or
