R-FOAM 200 is a polyurethane foam system designed to allow the manufacture of self skinned or structural components. This system has a cream time of 65 seconds making it ideal for hand processing. By using high speed mixing and weighing accurately, it is possible to produce effective mouldings without the use of foam dispensing machinery. R-FOAM 200 has excellent flow properties and in some cases can be demoulded in as little as 10-15 minutes without warping. This system will perform best with both components adjusted to 25ºC and moulds at 25-40ºC.
Previous product
Back to products
R-FOAM 100 Rigid Polyurethane Foam
From $86.25
Next product
R-FOAM 33 Rigid Polyurethane Foam
From $92.00
R-FOAM 200 Rigid Polyurethane Foam
$97.75 (inc. gst)
Related products
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
Brass Powder
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
JA6 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA6 stick is between 220-310 grams***
Copper Powder
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
