R-FOAM 200 is a polyurethane foam system designed to allow the manufacture of self skinned or structural components. This system has a cream time of 65 seconds making it ideal for hand processing. By using high speed mixing and weighing accurately, it is possible to produce effective mouldings without the use of foam dispensing machinery. R-FOAM 200 has excellent flow properties and in some cases can be demoulded in as little as 10-15 minutes without warping. This system will perform best with both components adjusted to 25ºC and moulds at 25-40ºC.
Previous product
Back to products
R-FOAM 100 Rigid Polyurethane Foam
From $86.25
Next product
R-FOAM 33 Rigid Polyurethane Foam
From $92.00
R-FOAM 200 Rigid Polyurethane Foam
$97.75 (inc. gst)
Related products
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Bronze Powder
Bronze powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Copper Powder
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Aluminium Powder
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
