R-FOAM 100 is a foam urethane with a 96kg/m cubed system designed to allow the manufacture of self skinned or structural components. The system exhibits excellent flow characteristics and can be either hand or machine mixed. Apart from the hard skin, the final mouldings have a high softening temperature combined with high compressive and flexural strengths.
Previous product
Back to products
Procast Polyurethane Resin
From $46.00
Next product
R-FOAM 200 Rigid Polyurethane Foam
From $97.75
R-FOAM 100 Rigid Polyurethane Foam
SKU: U-RFOAM100-S
$86.25 (inc. gst)
SKU: U-RFOAM100-S
Categories: Casting, Foam, Polyurethane Resin
Related products
Q-Cel 520
From $103.50
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
JA6 Alloy Stick
$230.00 (inc. gst)
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA6 stick is between 220-310 grams***
Sold out

Close
Surface Tissue
$7.48 (inc. gst)
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Epoxycast Clear Casting Resin
From $48.30
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Megapour Deep Cast Epoxy Resin
From $195.50
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Omyacarb 40
From $25.30
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Hanson Mixer
From $57.50
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
Sold out

Close
Barnes 6L Vacuum System
$632.50 (inc. gst)
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a