Pure Lube Mould Soap is a versatile lubricant for use as a mould separator. A pure liquid (non-detergent) soap seperator, used as a release when casting plaster/gypsum into a plaster mould, and to prevent plaster/gypsum products from adhering to most porous surfaces. Pure Lube may be used at full strength or diluted with water. Apply witha clean sponge until foam appears, dab off excess and repeat the process until a sheen appears.
Previous product
Back to products
Resin Mould Wax 50g
$25.30 (inc. gst)
Next product
PVA Release
From $28.75
Pure Lube Mould Soap
$18.40 (inc. gst)
Related products
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
AF-7 Anti-Foaming Agent
AF-7 Anti-Foaming Agent has been developed as an extremely effective, air release agent for Water Clear polyurethane material systems. Its
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Langridge Dry Artist Pigment
Langridge Dry Artist Pigments offer gorgeous metallics, intense opaques and vibrant fluoros, that can be used to pigment our resin
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
