PT Flex 70 Liquid Rubber is a two-part, liquid polyurethane system that cures (RTV) to a yellow/amber, Shore A70 rubber. PT Flex Series rubbers were specifically designed for prototyping and model making applications and offer fast pour times (~4 minutes) and fast demold times (~2 hours).
Previous product
Back to products
PTFLEX 20 80lb
$1,725.00 (inc. gst) $1,380.00 (inc. gst)
Next product
PTFLEX 85 80lb
$1,725.00 (inc. gst) $1,380.00 (inc. gst)
PTFLEX 70 16lb
$460.00 (inc. gst) $368.00 (inc. gst)
Available at:
Auckland
Related products
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
