PT Flex 20 Liquid Rubber is a two-part, liquid polyurethane system that cures (RTV) to a tan, Shore A23-25 rubber. This is the softest rubber in the PT Flex line of polyurethane mold rubbers. PT Flex Series rubbers were specifically designed for prototyping and model making applications and offer fast pour times (~4 minutes) and fast demold times (~2 hours).
Previous product
Back to products
Poly 74-45 80lb
$1,322.50 (inc. gst)
Next product
PTFLEX 70 16lb
$460.00 (inc. gst)
PTFLEX 20 80lb
$1,725.00 (inc. gst)
Available at:
Auckland
Related products
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
JA12 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA12 stick is between 210-280 grams***
Copper Powder
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
JA7 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
JA8 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA8 stick is between 250-400 grams***
