PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst) $40.48 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst) $2.76 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst) $4.14 (inc. gst)
Available at:
Auckland
Related products
A14 Black For Aluminium
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Copper B Coating
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
Brass B Coating
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
Powder Blue Patina
Powder Blue is a cold patina for bronze, brass, copper, and the Metal Coatings. This patina results in a stable
Tan Patina
Tan Patina is used to achieve an opaque tan finish on all metals. It may be applied hot or cold
Darkening Patina
Darkening Patina is most commonly used cold on bronze, brass, and copper to produce a beautiful brown finish. This patina
PC9 (Spray) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Rainbow Patina
Traditional Rainbow Patina is a very interesting finish. Depending on the application method and the metal used, many different finishes
