PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst)
Available at:
Auckland
Related products
Tiffany Green Patina
Tiffany Green is a cold patina for bronze, brass, and copper. It may be used both indoors and outdoors. If
Bronze Wool
A high quality bronze wool that is used when buffing or polishing back a bronze surface. This eliminates the problems
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Metal Cleaner
Sculpt Nouveau Metal Cleaner and Degreaser has been specially developed for the rapid and complete removal of rust, dirt, oil,
Prime-It for Metal Coatings
When applying traditional or acid patinas to the Metal Coatings over iron, steel, or aluminum, a primer must first be
Light Green Patina
Light Green Patina is a cold patina for bronze, brass, and copper. Apply to a clean, cold (65°-70°F) metal. It
Powder Blue Patina
Powder Blue is a cold patina for bronze, brass, copper, and the Metal Coatings. This patina results in a stable
M24 (Spray) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
