PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst)
Available at:
Auckland
Related products
Clear Wax For All Metals
Sculpt Nouveau’s Metal Wax is a specifically developed wax that allows that user to easily seal in a surface while
Smash-It
SMASH-IT is a breakaway blend made from high quality resins and polymers to give a unique glass effect. This product
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Brass B Coating
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
Antiquing Patina
Antiquing Patina is used to create an aged brown to black finish on bronze, brass, and copper. On iron, steel
Prime-It for Metal Coatings
When applying traditional or acid patinas to the Metal Coatings over iron, steel, or aluminum, a primer must first be
PC9 (Spray) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Bronze Wool
A high quality bronze wool that is used when buffing or polishing back a bronze surface. This eliminates the problems
