PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst)
Available at:
Auckland
Related products
Rainbow Patina
Traditional Rainbow Patina is a very interesting finish. Depending on the application method and the metal used, many different finishes
Bronze Wool
A high quality bronze wool that is used when buffing or polishing back a bronze surface. This eliminates the problems
Black Magic Patina
Black Magic Patina creates a beautiful, rich black patina on iron and steel. It takes only 3-5 minutes to develop
Smash-It
SMASH-IT is a breakaway blend made from high quality resins and polymers to give a unique glass effect. This product
M38 Antique Brown Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Bronze B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
Copper B Coating
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
