PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst)
PTFE Tubing 305
SKU: BSI-3305
$5.18 (inc. gst)
Available at:
Auckland
SKU: BSI-3305
Categories: Finishing & Specialty, Adhesives
Related products
Black Magic Patina
From $51.75
Black Magic Patina creates a beautiful, rich black patina on iron and steel. It takes only 3-5 minutes to develop
Rainbow Patina
$149.50 (inc. gst)
Traditional Rainbow Patina is a very interesting finish. Depending on the application method and the metal used, many different finishes
Bronze B Coating
From $57.50
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
Light Green Patina
From $40.25
Light Green Patina is a cold patina for bronze, brass, and copper. Apply to a clean, cold (65°-70°F) metal. It
M38 Antique Brown Patina
From $57.50
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Tiffany Green Patina
From $40.25
Tiffany Green is a cold patina for bronze, brass, and copper. It may be used both indoors and outdoors. If
Metal Cleaner
From $51.75
Sculpt Nouveau Metal Cleaner and Degreaser has been specially developed for the rapid and complete removal of rust, dirt, oil,
Liver of Sulfur
$48.30 (inc. gst)
This is a mixture of potassium sulfides which has traditionally been used to darken or ‘antique’ silver and bronzes. This