PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst)
Available at:
Auckland
Related products
Copper B Coating
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
Antiquing Patina
Antiquing Patina is used to create an aged brown to black finish on bronze, brass, and copper. On iron, steel
Isopropyl Myristate
Isopropyl Myristate is an oil based remover that is incredibly gentle on the skin. Good for removing regular make-up, grease
Slate Patina
Slate Black Patina is a versatile black finish for use on most metals. On iron and steel, it is used
Tiffany Green Patina
Tiffany Green is a cold patina for bronze, brass, and copper. It may be used both indoors and outdoors. If
Prime-It for Metal Coatings
When applying traditional or acid patinas to the Metal Coatings over iron, steel, or aluminum, a primer must first be
Stainless Black Patina
Stainless Black Patina is made specifically for stainless steel. It is not recommended for other metals, but on zinc and
M24 (Spray) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
