PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst)
PTFE Tubing 305
SKU: BSI-3305
$5.18 (inc. gst)
Available at:
Auckland
SKU: BSI-3305
Categories: Adhesives, Finishing & Specialty
Related products
Clear Wax For All Metals
From $34.50
Sculpt Nouveau’s Metal Wax is a specifically developed wax that allows that user to easily seal in a surface while
Light Green Patina
From $40.25
Light Green Patina is a cold patina for bronze, brass, and copper. Apply to a clean, cold (65°-70°F) metal. It
Metal Cleaner
From $51.75
Sculpt Nouveau Metal Cleaner and Degreaser has been specially developed for the rapid and complete removal of rust, dirt, oil,
Prime-It for Metal Coatings
From $51.75
When applying traditional or acid patinas to the Metal Coatings over iron, steel, or aluminum, a primer must first be
M24 (Spray) Black Patina
From $69.00
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Copper B Coating
From $57.50
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
Tiffany Green Patina
From $40.25
Tiffany Green is a cold patina for bronze, brass, and copper. It may be used both indoors and outdoors. If
Black Magic Patina
From $51.75
Black Magic Patina creates a beautiful, rich black patina on iron and steel. It takes only 3-5 minutes to develop