PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst)
Available at:
Auckland
Related products
Smash-It
SMASH-IT is a breakaway blend made from high quality resins and polymers to give a unique glass effect. This product
Tan Patina
Tan Patina is used to achieve an opaque tan finish on all metals. It may be applied hot or cold
PC9 (Spray) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Japanese Brown Patina
Japanese Brown may be used on bronze, brass, and copper resulting in a golden brown finish, but it is most
A14 Black For Aluminium
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
M24 (Spray) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Bronze B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
