PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst) $40.48 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst) $2.76 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst) $4.14 (inc. gst)
Available at:
Auckland
Related products
M24 (Spray) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Tiffany Green Patina
Tiffany Green is a cold patina for bronze, brass, and copper. It may be used both indoors and outdoors. If
Japanese Brown Patina
Japanese Brown may be used on bronze, brass, and copper resulting in a golden brown finish, but it is most
A14 Black For Aluminium
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Bronze Wool
A high quality bronze wool that is used when buffing or polishing back a bronze surface. This eliminates the problems
Copper B Coating
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
Tan Patina
Tan Patina is used to achieve an opaque tan finish on all metals. It may be applied hot or cold
Clear Wax For All Metals
Sculpt Nouveau’s Metal Wax is a specifically developed wax that allows that user to easily seal in a surface while
