PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst)
Available at:
Auckland
Related products
Rainbow Patina
Traditional Rainbow Patina is a very interesting finish. Depending on the application method and the metal used, many different finishes
Bronze Wool
A high quality bronze wool that is used when buffing or polishing back a bronze surface. This eliminates the problems
Clear Wax For All Metals
Sculpt Nouveau’s Metal Wax is a specifically developed wax that allows that user to easily seal in a surface while
Light Green Patina
Light Green Patina is a cold patina for bronze, brass, and copper. Apply to a clean, cold (65°-70°F) metal. It
Darkening Patina
Darkening Patina is most commonly used cold on bronze, brass, and copper to produce a beautiful brown finish. This patina
Japanese Brown Patina
Japanese Brown may be used on bronze, brass, and copper resulting in a golden brown finish, but it is most
Bronze B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
Isopropyl Myristate
Isopropyl Myristate is an oil based remover that is incredibly gentle on the skin. Good for removing regular make-up, grease
