PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst) $40.48 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst) $2.76 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst) $4.14 (inc. gst)
Available at:
Auckland
Related products
Tan Patina
Tan Patina is used to achieve an opaque tan finish on all metals. It may be applied hot or cold
M24 (Spray) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Slate Patina
Slate Black Patina is a versatile black finish for use on most metals. On iron and steel, it is used
Japanese Brown Patina
Japanese Brown may be used on bronze, brass, and copper resulting in a golden brown finish, but it is most
M38 Antique Brown Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Darkening Patina
Darkening Patina is most commonly used cold on bronze, brass, and copper to produce a beautiful brown finish. This patina
Rainbow Patina
Traditional Rainbow Patina is a very interesting finish. Depending on the application method and the metal used, many different finishes
