PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst) $40.48 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst) $2.76 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst) $4.14 (inc. gst)
Available at:
Auckland
Related products
Copper B Coating
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
Bronze Wool
A high quality bronze wool that is used when buffing or polishing back a bronze surface. This eliminates the problems
Brass B Coating
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
PC9 (Spray) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Powder Blue Patina
Powder Blue is a cold patina for bronze, brass, copper, and the Metal Coatings. This patina results in a stable
Isopropyl Myristate
Isopropyl Myristate is an oil based remover that is incredibly gentle on the skin. Good for removing regular make-up, grease
Bronze B Coating
The Metal Coatings are ground metal suspended in a non-toxic water based acrylic binder. They may be applied to both
M38 Antique Brown Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
