PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst)
PTFE Tubing 305
SKU: BSI-3305
$5.18 (inc. gst)
Available at:
Auckland
SKU: BSI-3305
Categories: Adhesives, Finishing & Specialty
Related products
M38 Antique Brown Patina
From $57.50
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Prime-It for Metal Coatings
From $51.75
When applying traditional or acid patinas to the Metal Coatings over iron, steel, or aluminum, a primer must first be
Antiquing Patina
From $40.25
Antiquing Patina is used to create an aged brown to black finish on bronze, brass, and copper. On iron, steel
Liver of Sulfur
$48.30 (inc. gst)
This is a mixture of potassium sulfides which has traditionally been used to darken or ‘antique’ silver and bronzes. This
Tan Patina
From $40.25
Tan Patina is used to achieve an opaque tan finish on all metals. It may be applied hot or cold
Clear Wax For All Metals
From $34.50
Sculpt Nouveau’s Metal Wax is a specifically developed wax that allows that user to easily seal in a surface while
M24 (Spray) Black Patina
From $69.00
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Powder Blue Patina
From $40.25
Powder Blue is a cold patina for bronze, brass, copper, and the Metal Coatings. This patina results in a stable