PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst)
Available at:
Auckland
Related products
Brass B Coating
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
Tiffany Green Patina
Tiffany Green is a cold patina for bronze, brass, and copper. It may be used both indoors and outdoors. If
M24 (Spray) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
M20 (Dip) Black Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
Metal Cleaner
Sculpt Nouveau Metal Cleaner and Degreaser has been specially developed for the rapid and complete removal of rust, dirt, oil,
Powder Blue Patina
Powder Blue is a cold patina for bronze, brass, copper, and the Metal Coatings. This patina results in a stable
Black Magic Patina
Black Magic Patina creates a beautiful, rich black patina on iron and steel. It takes only 3-5 minutes to develop
Stainless Black Patina
Stainless Black Patina is made specifically for stainless steel. It is not recommended for other metals, but on zinc and
