PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst) $40.48 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst) $2.76 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst) $4.14 (inc. gst)
Available at:
Auckland
Related products
Antiquing Patina
Antiquing Patina is used to create an aged brown to black finish on bronze, brass, and copper. On iron, steel
Liver of Sulfur
This is a mixture of potassium sulfides which has traditionally been used to darken or ‘antique’ silver and bronzes. This
Tan Patina
Tan Patina is used to achieve an opaque tan finish on all metals. It may be applied hot or cold
Black Magic Patina
Black Magic Patina creates a beautiful, rich black patina on iron and steel. It takes only 3-5 minutes to develop
Clear Wax For All Metals
Sculpt Nouveau’s Metal Wax is a specifically developed wax that allows that user to easily seal in a surface while
Isopropyl Myristate
Isopropyl Myristate is an oil based remover that is incredibly gentle on the skin. Good for removing regular make-up, grease
Brass B Coating
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
