PTFE Tubing 305 is a two foot length of tubing that may be cut off to any length (usually 2″). With one end cut at a 45° angle, can be inserted 1/8″ into Pocket CA top and into #312 top if it is cut down an additional 3/64″. For thin CA (Cyanoacrylate) products.
Previous product
Back to products
Super Gold +
$50.60 (inc. gst)
Next product
Extra CA Top 312
$3.45 (inc. gst)
PTFE Tubing 305
$5.18 (inc. gst)
Available at:
Auckland
Related products
Clear Wax For All Metals
Sculpt Nouveau’s Metal Wax is a specifically developed wax that allows that user to easily seal in a surface while
Slate Patina
Slate Black Patina is a versatile black finish for use on most metals. On iron and steel, it is used
Powder Blue Patina
Powder Blue is a cold patina for bronze, brass, copper, and the Metal Coatings. This patina results in a stable
Stainless Black Patina
Stainless Black Patina is made specifically for stainless steel. It is not recommended for other metals, but on zinc and
Copper B Coating
The Metal Coating “B” is specially formulated to provide a natural looking metal finish that a patina may be applied
Metal Cleaner
Sculpt Nouveau Metal Cleaner and Degreaser has been specially developed for the rapid and complete removal of rust, dirt, oil,
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
M38 Antique Brown Patina
All Birchwood patinas are considered traditional patinas that will age or darken metal. These patinas are sold concentrated and should
