Spray Poly Purge into open polyurethane Part A and B containers just before resealing to displace moist air and extend the product life. Poly Purge is heavier-than-air and is non-flammable and non-ozone depleting. It is packaged in an aerosol-type can with a special nozzle extension useful for directing the gas into the desired space.
Previous product
Back to products
PSTF Pigment 4x15ml Pack
$48.30 (inc. gst)
Next product
Pol-Ease 2300 Spray
$51.75 (inc. gst)
Poly Purge Dry Air
$63.25 (inc. gst)
Available at:
Auckland
Related products
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
D-Limonene 1L
DLIM-S
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
JA12 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA12 stick is between 210-280 grams***
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
