PlatSil Accelerator accelerates the pour times and demold times of PlatSil products. The addition of 1% Accelerator to the total mixed weight decreases the pour time to 1/3 the normal pour time. The addition of 2% decreases the normal pour time to 1/4. The addition of 3% decreases the normal pour time to 1/6. The demold time will also be reduced. Experiment on a small scale before making a larger mix. NOTES: Add Accelerator to Part B prior to mixing with Part A.
Previous product
Back to products
Geometric 8 Cavity Silicone Mould
$14.95 (inc. gst) $8.97 (inc. gst)
Next product
Platsil Gel-0030 Prosthetic Grade Silicone
From $172.50
PlatSil Accelerator
SKU: SR-PLATACC-S
$132.25 (inc. gst)
SKU: SR-PLATACC-S
Categories: Moulding, Silicone Rubber, Addition Cure Silicone
Related products
Barnes 6L Vacuum System
$632.50 (inc. gst)
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Eye Dropper
$1.73 – $6.90 (inc. gst)
Eyedroppers are ideal for adding liquid pigments to resins, or for creating effects in resin art using Isoproyl Alcohol or
Forton MG
From $51.75
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Geltex Latex Thickener
From $17.25
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Plastic Putty Knife 2 inch
From $1.73
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Sold out

Close
Surface Tissue
$7.48 (inc. gst)
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Sale

Close
Eclipse Bangle Mould
Sale

Close