PlatSil® 71-40 Silicone Rubber is a two-part, platinum-catalyzed, liquid silicone system that cures (RTV) to a translucent, Shore A40 rubber. This is a pourable rubber, but it can be easily thickened with Sil-Thix Liquid Thickener for brush-on application.
Product Description
• Excellent flow
• Medium Shore 40A Hardness
• Fast low-shrink cure with good pot life of 90 minutes
• 24 hour cure time
• High tear strength & high elongation
• Good resistance to casting resins, plaster, gypsum and cement based products.
Previous product
Back to products
Large Mandala Coaster Silicone Mould
$28.75 (inc. gst) $14.38 (inc. gst)
Next product
Poly 74-45 80lb
$1,322.50 (inc. gst)
Platsil 71-40 Silicone Rubber 20kg
$1,980.00 (inc. gst)
Available at:
Auckland
Description
Related products
Icypole Sticks
Icy pole sticks for mixing resins, not recommended for silicone or viscous materials. Great for adding and blending liquid and
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Measuring Cup 60ml
These 60ml measuring cups can be used to measure small volumes of resin, silicone catalyst, or for decanting small volumes
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Rounded Square Bangle Mould
MLD-B14
Liquid Latex
***ALSO REFERRED TO AS DIP OR SPRAY LATEX***
