Elementz Metallic Powder pigments are ideal for colouring and tinting the Barnes range of resins and coatings. These pigments may be mixed into the resin, or brushed onto the silicone mould surface. A test should always be performed with your resin of choice.
Please note that the colour of the metal particles may vary between batches and can change over time due to oxidation. If you require a consistent colour, please order a quantity that is large enough to complete your project rather than buying smaller quantities as you need it. These powders are Non-Edible, for decorative use only.
Elementz
From $34.50
Description
Related products
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Copper Powder
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
D-Limonene 1L
DLIM-S
JA7 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
