Our Dome No.4 Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Gloss
Resin required to fill: Approx. 15ml
Ring size: S-T
- Sorry, this product cannot be purchased.
Previous product
Back to products
Dome Ring Variation No.3 Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Next product
Deluxe Full Alanna Head Female Armature
$253.00 (inc. gst)
Dome Ring Variation No.4 Mould
$28.75 (inc. gst) $17.25 (inc. gst)
MLD-R9
Available at:
Auckland
Description
Related products
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Long Plastic Stirrer
Long plastic stirrers are designed for paint mixing but work well with resins and other materials.
Geltex Latex Thickener
Geltex Latex Thickener is used in latex moulding rubbers. Add up to 2% and shear mix until the desired consistency
Plastic Cups
The plastic polypropylene cups are great for mixing resins and silicones, especially when you ant clarity and visibility of the
Classic Bangle Mould
MLD-B10
Woven Bangle Mould
MLD-B1
