Classic Small Bowl Mould is a ready to use silicone mould. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax or acrylic resins like Forton MG may also be used. These moulds are made by Barnes using a high quality silicone and may be re-used to create beautiful homewares. This mould was made from a bowl which was turned on a lathe, so there is a lip at the base that makes them stackable. The finish of the mould is satin and the dimensions are approximately 83mm in diameter by 35mm high. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Previous product
Back to products
Circles Bangle Mould
$46.00 (inc. gst) $27.60 (inc. gst)
Next product
Organic Medium Platter Mould
$115.00 (inc. gst) $69.00 (inc. gst)
Classic Small Bowl Mould
$69.00 (inc. gst) $41.40 (inc. gst)
Available at:
Auckland
Related products
Plastic Putty Knife 2 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Liquid Latex
***ALSO REFERRED TO AS DIP OR SPRAY LATEX***
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Plastic Putty Knife 3 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Long Plastic Stirrer
Long plastic stirrers are designed for paint mixing but work well with resins and other materials.
Eye Dropper
Eyedroppers are ideal for adding liquid pigments to resins, or for creating effects in resin art using Isoproyl Alcohol or
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Eclipse Bangle Mould
MLD-B11
