Classic Small Bowl Mould

Classic Small Bowl Mould is a ready to use silicone mould. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax or acrylic resins like Forton MG may also be used. These moulds are made by Barnes using a high quality silicone and may be re-used to create beautiful homewares. This mould was made from a bowl which was turned on a lathe, so there is a lip at the base that makes them stackable. The finish of the mould is satin and the dimensions are approximately 83mm in diameter by 35mm high. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.