Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal powder are used to give a true metallic effect. Can be buffed, polished and a patina applied if required. Brass powder filler can be mixed with a variety of products including Forton, polyester, polyurethane and epoxy resins. This Brass powder is a fine -200 mesh. Please note that the colour of the metal particles may vary between batches and can change over time due to oxidization. If you require a consistent colour, please order a quantity that is large enough to complete your project rather than buying smaller quantities as you need it.
Previous product
Back to products
Aluminium Powder
From $35.65
Next product
Bronze Powder
From $69.00
Brass Powder
$51.75 (inc. gst)
Related products
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Aluminium Granules
Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
