Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly mixed with Epoxy Resin and Polyurethanes. Aluminium Powder is also used with resins to create a cold cast metal effect. The powder is mixed with the resin and then buffed or sanded once cured, creating an Aluminium finish. These powders give the ultimate metallic leafing finish in resin. Using only a smalll amount into your resin mix you can achieve the most amazing of metal looking finishes. This Aluminium Powder has an average particle size (D50) of 45 microns.
Previous product
Back to products
Surface Tissue
$7.48 (inc. gst)
Next product
Brass Powder
From $51.75
Aluminium Powder
SKU: FI-AP-T
$35.65 (inc. gst)
Related products
Copper Powder
From $51.75
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Q-Cel 520
From $103.50
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Iron Powder
From $40.25
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
JA12 Alloy Stick
$212.75 (inc. gst)
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA12 stick is between 210-280 grams***
Chopped Strand Mat 600gm
$12.65 (inc. gst)
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Sold out

Close
Surface Tissue
$7.48 (inc. gst)
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Forton MG
From $51.75
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Industrial Talc
From $18.40
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension