Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly mixed with Epoxy Resin and Polyurethanes. Aluminium Powder is also used with resins to create a cold cast metal effect. The powder is mixed with the resin and then buffed or sanded once cured, creating an Aluminium finish. These powders give the ultimate metallic leafing finish in resin. Using only a smalll amount into your resin mix you can achieve the most amazing of metal looking finishes. This Aluminium Powder has an average particle size (D50) of 45 microns.
Previous product
Back to products
Surface Tissue
$7.48 (inc. gst)
Next product
Brass Powder
From $51.75
Aluminium Powder
$35.65 (inc. gst)
Related products
Bronze Powder
Bronze powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Measuring Cup 60ml
These 60ml measuring cups can be used to measure small volumes of resin, silicone catalyst, or for decanting small volumes
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Copper Powder
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
