Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly mixed with Epoxy Resin and Polyurethanes. Aluminium Powder is also used with resins to create a cold cast metal effect. The powder is mixed with the resin and then buffed or sanded once cured, creating an Aluminium finish. These powders give the ultimate metallic leafing finish in resin. Using only a smalll amount into your resin mix you can achieve the most amazing of metal looking finishes. This Aluminium Powder has an average particle size (D50) of 45 microns.
Previous product
Back to products
Surface Tissue
$7.48 (inc. gst)
Next product
Brass Powder
$51.75 – $414.00 (inc. gst)
$41.40 – $331.20 (inc. gst)
$41.40 – $331.20 (inc. gst)
Aluminium Powder
$35.65 (inc. gst)
Related products
Pipette Dispenser
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
JA6 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA6 stick is between 220-310 grams***
Brass Powder
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
