Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high strength and minimal distortion. It is commonly mixed with Epoxy Resin and Polyurethanes. Aluminium Granules is also used with resins to create a cold cast metal effect. The granules are mixed with the resin and then buffed or sanded once cured, creating a speckly grit finish. Please note that the colour of the metal particals may vary between batches and can change over time due to oxidisation. If you require a consistant colour, please order a quantity that is large enough to complete your project rather than buying smaller quantities as you need it. The Aluminium Granules have an average particle size (D50) of 400 Micron.
Previous product
Back to products
Surface Tissue
$7.48 (inc. gst)
Next product
Brass Powder
From $51.75
Aluminium Granules
SKU: FI-AG-S
$57.50 (inc. gst)
Related products
Aluminium Powder
From $35.65
Aluminium Powder is traditionally added to resins to aid in high temp applications such as vacuum forming. It is commonly
Isopropyl Alcohol
From $19.55
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Pipette Dispenser
From $5.75
An easy and economical way of measuring out those small amounts of MEKP catalyst and colouring resin among other applications.
Megapour Deep Cast Epoxy Resin
From $195.50
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Copper Powder
From $51.75
Copper powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
JA7 Alloy Stick
$48.30 (inc. gst)
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA7 stick is between 290-420 grams***
JA6 Alloy Stick
$230.00 (inc. gst)
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA6 stick is between 220-310 grams***
Surface Tissue
$7.48 (inc. gst)
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer