Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high strength and minimal distortion. It is commonly mixed with Epoxy Resin and Polyurethanes. Aluminium Granules is also used with resins to create a cold cast metal effect. The granules are mixed with the resin and then buffed or sanded once cured, creating a speckly grit finish. Please note that the colour of the metal particals may vary between batches and can change over time due to oxidisation. If you require a consistant colour, please order a quantity that is large enough to complete your project rather than buying smaller quantities as you need it. The Aluminium Granules have an average particle size (D50) of 400 Micron.
Previous product
Back to products
Surface Tissue
$7.48 (inc. gst)
Next product
Brass Powder
From $51.75
Aluminium Granules
$57.50 (inc. gst)
Related products
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
D-Limonene 1L
DLIM-S
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
Eye Dropper
Eyedroppers are ideal for adding liquid pigments to resins, or for creating effects in resin art using Isoproyl Alcohol or
