Aluminium Granules are commonly used as a filler in resin moulds for vacuum forming and low pressure injection. Imparts high strength and minimal distortion. It is commonly mixed with Epoxy Resin and Polyurethanes. Aluminium Granules is also used with resins to create a cold cast metal effect. The granules are mixed with the resin and then buffed or sanded once cured, creating a speckly grit finish. Please note that the colour of the metal particals may vary between batches and can change over time due to oxidisation. If you require a consistant colour, please order a quantity that is large enough to complete your project rather than buying smaller quantities as you need it. The Aluminium Granules have an average particle size (D50) of 400 Micron.
Previous product
Back to products
Surface Tissue
$7.48 (inc. gst)
Next product
Brass Powder
From $51.75
Aluminium Granules
$57.50 (inc. gst)
Related products
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Brass Powder
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
JA12 Alloy Stick
*** Our website cannot supply custom weights, only per/kg – contact our Henderson store for a specific weight, as the average JA12 stick is between 210-280 grams***
Industrial Talc
Industrial Talc is a budget priced filler for reducing cost and exotherm in resins. Also used as a surface tension
Surface Tissue
Surface tissue is used in the inner corrosion barrier to form a resin-rich layer, and also in the exterior layer
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Megapour Deep Cast Epoxy Resin
Megapour Epoxy Resin Deep Casting System is an epoxy resin system specifically designed for deep pouring and large castings. It
Omyacarb 40
Omyacarb is a Medium-ground calcium carbonate filler/extender suitable for most applications where a relatively coarse product is required.
