Anti-foam AF-4 is a “surface tension relieving” agent recommended as an additive for many polyurethane systems. Its purpose is to assist in the vacuum degassing procedure (deaeration), by reducing the surface tension of entrained air bubbles in the resin mixture. Also, it assists in better resin flow and wet out in molds.
Note: AF-4 does not replace the need for pulling a vacuum on casting polyurethanes to eliminate air.
The term anti-foam refers to the elimination or more rapid reduction of foaming action during the vacuum de-gassing process. Antifoam AF-4 is completely silicone free and does not affect the color, appearance or bond ability of cured urethane parts.
Previous product
Back to products
Poly Optic 1411 Clear Casting Resin
From $253.00
Next product
PolyColor Resin Powder
From $18.40
AF-4 Anti-Foaming Agent
$115.00 (inc. gst)
Description
Related products
Q-Cel 520
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Epoxyglass Clear Coating Epoxy Resin
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
Epoxycast Clear Casting Resin
Epoxycast Clear Casting Resin Epoxycast Clear Casting Resin is a two-part, clear system specifically designed for casting small to medium-sized
Barnes 6L Vacuum System
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Isopropyl Alcohol
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Iron Powder
Iron powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Bronze Powder
Bronze powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
