When adding a liquid pigment to a resin system we suggest you use no more than 5% of the total amount of resin, as a higher percentage may prevent the resin from curing properly.
These dyes may be used to achieve a highly transparent finish (optically clear), or when a higher percentage is added it may achieve a more translucent finish (still maintains clarity but no longer optically clear). A great example of this is when pigment is added to a coating epoxy vs a casting epoxy. When the resin is poured at only a few mm thick, the colour may appear less intense or vibrant compared to a casting application that may be anywhere from 5mm-100mm+ deep.
The PSTF dyes work very well in conjunction with powder pigments such as the Pearl-Ex range of mica powders, and the PolyColor powder pigments. A great example of this is when a project requires a powder pigment, but as these do not disperse and dissolve into the resin, you may use a dye to create a base tone rather than leaving it clear. This can create dimension within the resin pour or re-enforce the powder pigments tone. For example, PSTF in Turquoise mixed with Pearl-Ex Turquoise creates a rich turquoise finish. A colourless powder pigment such as the Diamond Dust PolyColor powder may be used with any PSTF to create a metallic finish in the tone of your choice.
Previous product
Back to products
Opaque Pigment 25ml
$19.55 (inc. gst)
Next product
Disposable Apron
$2.30 – $5.75 (inc. gst)
PSTF Translucent Pigments 15ml
SKU: PSTF
$13.80 (inc. gst)
The Barnes range of PSTF dyes may be used with Epoxy, Polyurethane, Polyester and UV resins. Adding them to colourless resins is recommended to achieve the most vibrant results. Conduct a small test if you are choosing to use a pre-pigmented resin system.
SKU: PSTF
Categories: Casting, Resin Pigments, Translucent Dyes And Inks
Description
Related products
Brass Powder
$51.75 – $414.00 (inc. gst)
Brass powder fillers are more commonly used in resins for producing cold cast metal effects. Generally, higher amounts of metal
Epoxyglass Clear Coating Epoxy Resin
$109.25 – $1,012.00 (inc. gst)
EPOXYGLASS is a two part ultra clear epoxy coating resin used by professional artists and hobbyists Australia wide. EPOXYGLASS is
Barnes 6L Vacuum System
$632.50 (inc. gst)
This vacuum degassing unit is designed to remove air from resin and silicone systems prior to pouring. It is a
Chopped Strand Mat 300gm
$7.48 (inc. gst)
Our CSM 300gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
Q-Cel 520
$103.50 – $161.00 (inc. gst)
Q-Cel 520 is a hollow glass micro-balloon which can be mixed with just about any resin. Q-Cel will make the
Isopropyl Alcohol
$19.55 – $115.00 (inc. gst)
Isopropyl Alcohol is probably the most essential product to have on hand at any time, especially in the make-up kit.
Citro-Clean Multipurpose Cleaner
$34.50 (inc. gst)
Citro-Clean Multipurpose Cleaner is available in a 500ml ready to use spray bottle. A great multipurpose cleaner for tools and
Forton MG
$51.75 – $172.50 (inc. gst)
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha