Our Tom Thumb Ring Mould is a ready to use silicone mould that may be used with a variety of casting materials. An appropriate casting resin such as an epoxy or polyurethane is a popular choice, but other materials like wax may also be used. The mould was made from a ring which was originally sculpted from clay and is handmade in character. Note: all measurements are approximate. Due to the handmade nature of this mould, imperfections may exist in the mould and dimensions may change when cast piece is sanded.
Finish: Gloss
Resin required to fill: Approx. 10ml
Ring size: V
Previous product
Back to products
Slant Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Next product
Low Dome Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
Tom Thumb Ring Mould
$28.75 (inc. gst) $17.25 (inc. gst)
MLD-R4
Available at:
Auckland
Description
Related products
Chopped Strand Mat 600gm
Our CSM 600gm is an emulsion chopped strand mat made of randomly distributed chopped E-glass strands held together by an
AntiCrak Fibre 13mm 500g
The AntiCrak Fibre 13mm 500g is a premium Alkali-Resistant Fiber used for concrete crack control or gypsum casting. Low percentages
Plastic Putty Knife 1.5 inch
Plastic Putty Knives are the perfect tool for successfully mixing urethane or silicone in large volumes. Flat blade helps scrape
Glossy Cuff Bangle Mould
MLD-B13
Small Carved Bangle Mould
MLD-B15
Forton MG
Forton MG (Forton Modified Gypsum) is a system whereby a polymer additive (Forton VF812) enhances the properties of the alpha
Woven Bangle Mould
MLD-B1
Hanson Mixer
All purpose mixing blades that attach to a power drill to mix quantities of liquid. This brand mixes with less
