Barnes have a large range of Silicone Rubber.Includes Pinkysil, Ultrasil,M4503. Oddbod, newly created lifecasting silicone in conjunction with Oddstudio is now available
Use for thickening silicone RTV3428.
Banana Skin is ideal for skin moulding as well as for moulds with large undercuts. It has a high tear strength and high elongation.
C1200 has been specifically developed for the professional production of reusable vacuum bags, used in the production of composite parts. Due to its shear thinning behaviour it will be self levelling, yet not run off vertical surfaces
Smith's Theatrical Prosthetic Deadener can be used at up to 250% with PLATSIL GEL-10 to simulate human tissue. Deadener is especially suited for applications where a "soft or dead feel" is desired as it will not leach from the silicone surface as standard silicone oils/softeners will.
Kneadable, addition-curing, two component silicone putty that cures at room temperature.
Elastosil M 4470 is a 60 duro RTV-2 silicone rubber. This condensation-curing silicone vulcanizes at room temperature with the addition of either of two catalysts.
M4503 is especially suitable for reproducing models with pronounced undercuts in casting resins. Other materials, such as wax and plaster, may be cast without any problems in moulds made from M4503. Recommended for: General Moulding, Large Parts, Plaster & ResinPotlife & Demould: Work time - 90 mins / Demould time - 24 hrsHardness & Type:...
Elastosil® M4601 is perfectly suitable for all moulds of models with pronounced undercuts that are to be reproduced in casting resins. M4601 is also a Food Grade Silicone Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness & Type: Shore A28 +/-2...
M4642 is perfectly suitable for all moulds with undercuts that are to be reproduced in casting resins, & a certain inherent rigidity of the mould is required. M4642 is a food grade silicone rubber. Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness...
M4644 is a high performance silicone mould-making compound that is suitable for reproducing models with undercuts in polyurethane or epoxy resins. M4644 is also a Food Grade Silicone Rubber Recommended for: Food Grade, Concrete, Plaster, Epoxy, PolyurethanePotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness & Type: Shore A40...
Elastosil M4670 is suitable for food contact when cured properly and ideal for use with low melt alloys. M4670 is also a Food Grade Silicone Rubber. Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 60 mins / Demould time - 24 hrsHardness & Type: Shore A55 +/-2 Silicone Elastomer, 80000cps
ODDBOD is a smooth viscosity, long lasting addition curing silicone rubber designed for lifecasting. ODDBOD is applied directly to the skin to make moulds of the hands, face or other body parts and sets at room temperature. ODDBOD is suitable for most casting materials. Pinkysil oddbod is a skin safe silicone.
Pinkysil Putty is a flexible silicone impression putty. A kneadable, addition-curing two component silicone putty that cures at room temperature with a convenient 1:1 ratio, colour indicator for mixing and extremely fast cure. The unique putty consistency allows the manufacture of quick impression moulds from practically any surface.
Pinkysil silicone is a super fast setting, certified skin safe silicone. User friendly with its 1:1 mix ratio by volume. Pinkysil is ideal for achieving small intricate details. No need for scales or degassing. Recommended for: Fast Moulds, Small Moulds, Beginners, Fine DetailsPotlife & Demould: Work time - 6 mins / Demould time - 30 minsHardness...
Platsil 71R Retarder is added to Platsil Gel-10 Part A prior to mixing with Part B to slow the cure giving a longer potlife and demould time. Adding 1% of the total A:B mix will roughly double the working time, 2% will triple the work time and 5% will extend the potlife to approximately 60 minutes. Care must be taken at high ratios as rates over 5% may...
Platsil Gel-00 Prosthetic grade addition-curing, two component silicone rubber that cures at room temperature and features: very fast cure, 1:1 mixing by weight, very low Shore 00 Hardness (approx 30), Versatility of thickeners, retardants and accelerants, and is the industry standard for film prosthetics.
Platsil Gel-10 is a versatile silicone for making prosthetic makeups, small creatures and other special effects applications. When used with Smith's Theatrical Deadener it will product a "dead" feel and will not leach out as other silicone fluids and dilutors will.
A Hardener to be used with Platsil Gel-25.
Deadener For Platsil Gel-25.
PlatSil Gels are 1A:1B (by weight or volume) platinum silicones with a 5-6 minute working time. They cure in 30-60 minutes and can provide a wide range of hardness. Use PlatSil Gels as a mould rubber, for prosthetic appliances, and for life-casting
Used for thickening PlatSil Gel-10 and enabling brushing or layering of the liquid silicone. Adding 1% by weight to the total mix will create a light bodied, non sag gel. Adding amounts up to 5% will create a thicker mix.
Translucent, flowable, addition cure silicone which has an excellent mould life for use with polyurethane resins. Commonly used for concrete and plaster production. Recommended for: Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 60 mins / Demould time - 15-24 hrsHardness & Type: Shore A28 +/-2 Silicone Elastomer, 20000cps
Silicone Pigments are suitable for coloring addition and condensation cure RTV silicones. Can also be used to colour your silicone catalyst for easier mixing.
Soft Trans is a high strength, condensation cure silicone with excellent flow and perfect for soft moulds. It has a shore hardness of approximately 12 ~ 14. Used widely in the special effects industry.