Mould making supplies

There are 25 products.
Showing 1 - 24 of 25 items
  • 11013 Thixo
    SR-11013

    Use for thickening silicone RTV3428.

    $ 21.74
  • Banana Skin Silicone Rubber Banana Skin Silicone Rubber
    Available
    Banana Skin Silicone Rubber
    SR-BANANA

    Banana Skin is ideal for skin moulding as well as for moulds with large undercuts. It has a high tear strength and high elongation.

    $ 94.30
  • C1200A/B BluE
    Available
    C1200 A/B Dispensable silicone rubber
    SRW-C1200

    C1200 has been specifically developed for the professional production of reusable vacuum bags, used in the production of composite parts. Due to its shear thinning behaviour it will be self levelling, yet not run off vertical surfaces

    $ 115.00
  • Deadener for PlatSil Deadener for PlatSil
    Available
    Deadener for PlatSil
    SR-PLATDEAD

    Smith's Theatrical Prosthetic Deadener can be used at up to 250% with PLATSIL GEL-10 to simulate human tissue. Deadener is especially suited for applications where a "soft or dead feel" is desired as it will not leach from the silicone surface as standard silicone oils/softeners will.

    $ 17.25
  • M4470/T37 Silicone Rubber M4470/T37 Silicone Rubber
    Available
    M4470/T37 Silicone Rubber
    SRW-4470

    Elastosil M 4470 is a 60 duro RTV-2 silicone rubber. This condensation-curing silicone vulcanizes at room temperature with the addition of either of two catalysts.

    $ 57.50
  • M4503/T35 Condensation Cured Silicone Rubber
    Available
    M4503/T35 Condensation Silicone Rubber
    SRW-4503

    M4503 is especially suitable for reproducing models with pronounced undercuts in casting resins. Other materials, such as wax and plaster, may be cast without any problems in moulds made from M4503. Recommended for: General Moulding, Large Parts, Plaster & ResinPotlife & Demould: Work time - 90 mins / Demould time - 24 hrsHardness & Type:...

    $ 92.00
  • M4601A/B Silicone Rubber
    Available
    M4601 Silicone Rubber
    SRW-4601

    Elastosil® M4601 is perfectly suitable for all moulds of models with pronounced undercuts that are to be reproduced in casting resins. M4601 is also a Food Grade Silicone Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness & Type:  Shore A28 +/-2...

    $ 115.00
  • M4642A/B Silicone Rubber
    Available
    M4642 Silicone Rubber
    SRW-4642

    M4642 is perfectly suitable for all moulds with undercuts that are to be reproduced in casting resins, & a certain inherent rigidity of the mould is required. M4642 is a food grade silicone rubber. Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness...

    $ 69.00
  • M4644A/B Silicone Rubber
    Available
    M4644 Silicone Rubber
    SRW-4644

    M4644 is a high performance silicone mould-making compound that is suitable for reproducing models with undercuts in polyurethane or epoxy resins. M4644 is also a Food Grade Silicone Rubber Recommended for: Food Grade, Concrete, Plaster, Epoxy, PolyurethanePotlife & Demould: Work time - 90 mins / Demould time - 12 hrsHardness & Type: Shore A40...

    $ 69.00
  • M4670 A/B Food Grade Silicone Rubber
    Available
    M4670 Silicone Rubber
    SRW-4670

    Elastosil M4670 is suitable for food contact when cured properly and ideal for use with low melt alloys. M4670 is also a Food Grade Silicone Rubber. Recommended for: Food Grade, Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 60 mins / Demould time - 24 hrsHardness & Type: Shore A55 +/-2 Silicone Elastomer, 80000cps

    $ 69.00
  • Pinkysil Putty Silicone Rubber
    Available
    Pinkysil Putty Silicone Rubber
    SR-PP

    Pinkysil Putty is a flexible silicone impression putty. A kneadable, addition-curing two component silicone putty that cures at room temperature with a convenient 1:1 ratio, colour indicator for mixing and extremely fast cure. The unique putty consistency allows the manufacture of quick impression moulds from practically any surface. 

    $ 35.65
  • Pinkysil - Fast Set Silicone
    Available
    Pinkysil® - Fast Set Silicone
    SR-PINKY

    Pinkysil silicone is a super fast setting, certified skin safe silicone. User friendly with its 1:1 mix ratio by volume. Pinkysil is ideal for achieving small intricate details. No need for scales or degassing. Recommended for: Fast Moulds, Small Moulds, Beginners, Fine DetailsPotlife & Demould: Work time - 6 mins / Demould time - 30 minsHardness...

    $ 51.75
  • PlatSil 71R Retarder
    Available
    PlatSil 71R Retarder
    SR-PLATRET

    Platsil 71R Retarder is added to Platsil Gel-10 Part A prior to mixing with Part B to slow the cure giving a longer potlife and demould time. Adding 1% of the total A:B mix will roughly double the working time, 2% will triple the work time and 5% will extend the potlife to approximately 60 minutes. Care must be taken at high ratios as rates over 5% may...

    $ 25.30
  • Platsil Gel-10 Prosthetic Grade Silicone
    SR-PLATGEL10

    Platsil Gel-10 is a versatile silicone for making prosthetic makeups, small creatures and other special effects applications. When used with Smith's Theatrical Deadener it will product a "dead" feel and will not leach out as other silicone fluids and dilutors will.

    $ 32.20
  • RTV3428 Translucent Flowable Silicone
    SR-3428

    Translucent, flowable, addition cure silicone which has an excellent mould life for use with polyurethane resins. Commonly used for concrete and plaster production. Recommended for: Concrete, Plaster, Epoxy, Polyurethane, PolyesterPotlife & Demould: Work time - 60 mins / Demould time - 15-24 hrsHardness & Type: Shore A28 +/-2 Silicone Elastomer, 20000cps

    $ 69.00
  • Silicone Diluent
    SR-SD

    A non-reactive fluid used as a dilutant. When used in small amounts of up to 10% it allows for retention of physical properties while reducing the viscosity of the total system. Used with silicones like SOFT TRANS of amounts up to 30%, it will allow for the production of floppy 'skin-like' material.

    $ 14.95
  • Soft Translucent Silicone Rubber
    Available
    Soft Translucent Silicone Rubber
    SR-SOFT

    Soft Trans is a high strength, condensation cure silicone with excellent flow and perfect for soft moulds. It has a shore hardness of approximately 12 ~ 14. Used widely in the special effects industry.

    $ 57.50
  • T35 Catalyst
    SRW-T35

    T35 Catalyst is a Catalayst to be used with M4503

    $ 11.50
  • T47 Catalyst
    Available
    T47 Catalyst
    SRW-T47

    Extra Catalyst for T47.

    $ 14.95
  • Thixotropic M
    Available
    Thixotropic M
    SRW-THIXO

    A colorless, cloudy medium viscosity liquid with a faint odor.  Exclusively used to thicken those condensation curing RTV-2 silicone rubber grades of the elastosil M45 series which are flowable as supplied.

    $ 18.40
  • Transil
    Available
    Transil - Translucent Silicone Rubber
    SR-TRANSIL

    Transil is a two-component, addition curing, low viscosity silicone designed for taking very fast impressions.  Recommended for: Fast Moulds, Small Moulds, Tinted Parts, Fine DetailsPotlife & Demould: Work time - 6 mins / Demould time - 30 minsHardness & Type:  Shore A20 +/-2 Silicone Elastomer, 2500cps

    $ 51.75
  • Tufsil 28 Condensation Cured Silicone Rubber 20.8kg
    SR-TS28-L

    Pourable, condensation-curing, two component silicone rubber that cures at room temperature and features:

    $ 672.75
  • Vario 15 Silicone Rubber
    SRW-V15

    Vario is a high performance addition curing silicone with the unique ability to be blended for hardness and cure speed. Vario 15 and Vario 40 can be blended to achieve any hardness between 15A and 40A. Recommended for: Moulds, Skins, SFX, Props, Tinted Parts, ResinsPotlife & Demould: Work time - 90 mins / Demould time - 6-12 hrsHardness & Type:...

    $ 51.75
  • Vario 40 Silicone Rubber
    SRW-V40

    Vario is a high performance addition curing silicone with the unique ability to be blended for hardness and cure speed. Vario 15 and Vario 40 can be blended to achieve any hardness between 15A and 40A. Recommended for: Moulds, Skins, SFX, Props, Tinted Parts, ResinsPotlife & Demould: Work time - 90 mins / Demould time - 6-12 hrsHardness & Type:...

    $ 51.75