Moulding materials ranging from Fibreglass, Forton, Plasters. We also have a vast range of Silicone Rubbers that you can use for your mould making, otherwise we also have some Ready to use moulds.
Use for thickening silicone RTV3428.
25 Strands of 3Doodler Flexy Retro ABS Plastic 10" per strand (a total of 250 inches of plastic, or 2,500 inches of doodling - the 3Doodler has a 10:1 ratio)
25 Strands of 3Doodler Black ABS Plastic 10" per strand (a total of 250 inches of plastic, or 2,500 inches of doodling - the 3Doodler has a 10:1 ratio)
This 3Doodler ABS Essentials Mixed Pack of 25 strands contains: 5 x Grand Bleu5 x EverGreen5 x Black Belt Black5 x Riding Hood Red5 x SunnySide Yellow
ABS Meta Mixed Pack combines an unexpected group of must have colors for your 3Doodler. Pack contains 25 strands made of durable ABS material with five strands in polar white, choco brown, lagoon blue, plum purple and skyline silver color.
25 Strands of 3Doodler Polar White ABS Plastic 10" per strand (a total of 250 inches of plastic, or 2,500 inches of doodling - the 3Doodler has a 10:1 ratio)
Compact and easy to use, the 3Doodler extrudes heated plastic that cools almost instantly into a solid, stable structure. Comes with 50 strands of plastic and maintenance accessories.
The Essentials Colour PLA Pack consists of 25 strands of your chosen colour pack in PLA or ABS or FLEX. The individual strand is 25cm in length and can produces approximately 280cm of doodling fun! Each straight-cut strand is 25cm long and 3mm in diameter.
For every inch of plastic the 3Doodler creates 10 inches of Doodle. Compatible with 3Doodler 1.0, 2.0 and Create. Pack of 25 pieces.
Accu-cast 390 alginate is light yellow/buff in colour. It sets in approximately 3 minutes using 32 degrees Celsius water. Accucast alginate produces high detail when smooth mix achieved. Can be mixed very thin and will set firm and strong, with good tear strength. Ideal for small life casting projects like hands in a mould.
Accu-cast 880 alginate is ideal for very large life casting projects like large props and body parts. Also ideal for use in hot environments where other alginates set too quickly. Light blue in colour.
Accu-cast IBG alginate is ideal for medium-sized life casting projects like faces, heads and torsos. Orange in colour.
Accu-cast 680 alginate is ideal for medium-sized projects, especially faces and heads. It is green in colour and sets in approximately 6 minutes.
Alginate will not adhere to itself once it has set up. Using alginate bonder between coats will allow alginate to stick together. Great for those small areas where there just wasn't enough build-up.
A pre-made vacuum formed plastic resin mould. Very simple to use and can be reused over and over to obtain many parts. With the use of the correct release agent, most resins including clears such as EASYCAST CLEAR, BQUEEN, Clear Casting Polyester can be poured. Simply place the tray on a level surface, spray a light film of release agent, mix the resin as...
Banana Skin is ideal for skin moulding as well as for moulds with large undercuts. It has a high tear strength and high elongation.
Bodywrap bandages 3inch rolls are ideal for rigid case over alginate life casts or as a fast case mould over flexible moulding materials. Great for use in projects involving faces, heads and torsos
Our Broadband Bangle Mould is a premade silicone moulds can be used with all our resins for creating beautiful jewellery pieces. Note: all measurements are approximate due to handmade nature and may change when sanded.
Brush latex is a moulding compound based on pre-vulcanized natural rubber latex. Pre-vulcanized latex is recommended for mould production as it only requires drying to give a strong elastic film.
A cheaper version of the Swedtool type system used for measuring out MEKP catalyst.
C1200 has been specifically developed for the professional production of reusable vacuum bags, used in the production of composite parts. Due to its shear thinning behaviour it will be self levelling, yet not run off vertical surfaces
Regular casting plaster used for quick casts into alginate or latex moulds.
Challenge 95 is primarily a release for flexible and rigid polyurethane elastomers and foams. It can be used for other polyurethane systems as well, however, it is advisable to test prior to its use. Challenge 95 is a universal release for plaster, metal, urethane, and epoxy molds.
Chopped Strand Mat Powder is made of randomly distributed chopped strands held tighter by a powder binder. It is compatible with polyester and epoxy resins.